Free consultationCalls 8 am to 8 pm, every dayWhatsApp 24 hours, every dayBhubaneswar · Cuttack · Khordha
Home / Services / RO and Geyser Service

RO and Geyser Service in Bhubaneswar

Trained technicians handle RO purifier and geyser problems, with the price told to you before any work starts.

In many Odisha homes, hard water leaves white scale inside the geyser and on the heating element, and the hot water slowly gets weaker. RO purifiers face their own wear, from a clogged filter to a membrane that lets water through more slowly than before. Regular checks help catch these problems early. House Republic offers RO and geyser service in Bhubaneswar, covering RO purifier service, filter and membrane change, geyser repair and geyser installation.

Start with a free consultation. Share a photo of the RO unit or geyser on WhatsApp, or let us look at it during the visit, and we tell you the price before any work begins. Call +91 80938 04941 every day from 8 am to 8 pm. WhatsApp +91 82807 64351 is open 24 hours. Our service areas are Bhubaneswar, Cuttack and Khordha.

When to call us

  • RO water tastes odd or the flow has become weak
  • RO filter change light is on, or output is very slow
  • Geyser is not heating, or takes too long to heat
  • White scale or crust from hard water
  • Water leaking from the geyser body or pipe joints

How we do it

  1. Call or WhatsApp

    Call +91 80938 04941 from 8 am to 8 pm, or message +91 82807 64351 on WhatsApp at any time. Tell us the RO or geyser brand and what is happening.

  2. Free consultation

    We look at the problem from your photos or at the visit. We tell you the likely cause and the price before we start.

  3. Visit at your home

    In most areas, a trained technician in House Republic uniform comes the same day or the next day. They check the filter, the membrane or the geyser element, and the power point.

  4. Work and written warranty

    We start only after you agree to the price. The work comes with a written warranty.

What is included

  • RO water purifier service
  • Filter and membrane change
  • Low water flow from the RO
  • Geyser that is not heating
  • Geyser installation
  • Hard water scale cleaning

Safety at home

Switch off the geyser at its switch and at the main MCB before you open the cover or drain the tank. A storage geyser must always be full of water before it is switched on, otherwise the heating element can burn out. Keep the RO unit and its power point dry, and never touch wiring with wet hands. If you smell burning or see a spark at the geyser point, switch it off and call us.

Time needed: A filter change or a routine RO service is usually a short visit, while a membrane change, a geyser repair or a geyser installation takes longer. Our technician confirms the time after seeing the unit and the water supply.

Areas we cover

Bhubaneswar, Cuttack and Khordha.

FAQ

Questions about ro and geyser service

Do you do RO and geyser service in Bhubaneswar at short notice?

Yes, in most areas of Bhubaneswar, Cuttack and Khordha, we aim to visit the same day or the next day. Write us a WhatsApp message on +91 82807 64351 at any hour, or call +91 80938 04941 between 8 am and 8 pm. Include the brand, the model and a photo of the problem so we can bring the right part.

How often should an RO filter be changed?

The timing depends on how much water passes through the RO and how hard the supply is. Many RO units show a filter change light, and the manual for your model gives the guideline. Where water is hard or carries sediment, filters can clog sooner, so a check at the visit is useful. Our technician looks at the filter and the membrane during the free consultation and tells you whether a change is needed now.

Why is my RO giving very little water?

Low flow usually comes from a clogged pre-filter, a membrane that needs changing, low water pressure coming into the unit, or a blocked line near the tap. Voltage drops at the power point can also slow the RO pump in some models. Check whether the filter light is on, then send us a photo of the unit on WhatsApp. We look at the cause and tell you the price before any work starts.

Why is my geyser not heating?

Common reasons include a faulty heating element, a tripped MCB or thermostat, a loose wire, or a geyser that was switched on before it was full of water. Hard water scale can also coat the element and slow the heating. Switching it on again and again will not help. We look at the cause and tell you the price before any repair starts, so you know what the work will involve.

How much does an RO or geyser service cost?

The price depends on the job. A filter change, a membrane change, a geyser repair and a new geyser installation each need different parts and time, so we cannot name a figure without seeing the unit. You get the price at no charge before any work starts, through the free consultation on WhatsApp photos or at the visit, and you decide after that.

Tell us what needs fixing

Free consultation on a call (8 am to 8 pm, every day) or on WhatsApp (24 hours, every day). We tell you the price before any work starts.

CallWhatsApp us
Chat on WhatsApp